I、 Product OverviewYT-5202 is a fiber optic serial data transceiver that can support both 1-way RS232 and 2-way RS485 (or 1-way RS422) interfaces. It is the best choice for connecting a remote terminal unit (RTU) to a host (HOST) or a distributed data acquisition system (SCADA) controller. It supports multiple Asynchronous communication protocols such as RS-232 and RS-485, and can simultaneously use one RS-232, two RS-485 interfaces or one RS422 interface. It supports 2-wire (half duplex) RS-485 and 3-wire RS232 communication. Supports multiple fiber optic connection methods between asynchronous serial ports, and supports devices with two asynchronous serial ports for full duplex (RS232) or half duplex (RS485) communication through fiber optic. The communication distance can reach up to 2 kilometers for multimode and 20 kilometers for single mode, with a maximum transmission rate of 115.2 KBPS for RS-232 signals and 460 KBPS for RS-485 signals. Interfaces with different electrical standards can be mixed, RS-232 devices can be used to connect RS-485/422 devices, replacing RS-232 to RS-485/422 interface converters or photoelectric isolators.
YT-5202 can support synchronous sending and receiving of data, and has an automatic enabling control circuit for data flow. A pure hardware fiber optic transceiver module designed specifically for low-speed serial data transmission and reception in industrial control can achieve almost zero delay in data transmission and reception, greatly improving the compatibility of equipment control software.
II、 Product performance1. Adopt pure hardware Optical module, with zero delay for signal transmission
2. Supports single mode fiber/multimode fiber, with optional fiber ports FC/SC/ST, default to single mode and FC ports
3. Supports RS-232/RS-485/422 interfaces
4. High data transmission rate, adaptive Baud, point-to-point transmission, up to 460Kbps
5. Long transmission distance: 20 kilometers for single mode fiber and 5 kilometers for multimode fiber
6. Working temperature: -40 ° C to+85 ° C, relative humidity: 5% to 95%
7. Working wavelength: 1310nm (multimode), 1310nm 1550m (single mode)
8. Electrical interface: RS-232/485/422 output is connected through wiring terminals
9. RS-22 interface characteristics: standard RS-232 three-wire interface
10. Input voltage DC9-30V, 200mA
11. RS-485 interface with 1200W TVS lightning protection per channel
12. Product size: 113 * 5 5 * 25MM
III、 Product List1. YT-5202 fiber optic to 2-way RS485 transceiver 1
2. 1 12V/500mA DC power supply
3. 1 product manual
Tel：0755-84664023、84660949 Fax：0755-84660949-816
